China Good quality Pto Driven Sunflower Shell Biomass Pellet Machine pto shaft connector

Product Description

Wide Application of PTO Driven Wood Pellet Mill

1. Since this PTO pellet mill is suitable for farmers, so the raw materials for PTO wood pellet mill are usually easy to get. Sawdust, shavings, rice husk, cotton stalk, cotton seed skins, weeds and CZPT stalks and other plant wastes can all be pelletized into high quality pellets by using the PTO driven wood pellet mill.                                2. The pellets made by the machine are mainly used as fuels for stove, CZPT and other heating equipments. In addition, the PTO pellet mill can also make pellets for animal bedding and animal feed.

 

Specification
1). Low noise.
2). CE approved.
3). Long service life.
4).Good after-sale service.
5). Move it anywhere you want.
6).Set it freely for little space.

 

Advantages
1. With reasonable design and compact structure. The PTO wood pellet mill is designed to be connected and disconnected easily.
2. Easy and convenient to use. Since the machine can connected with the tractor, so it is easy to move the PTO pellet mill .
3. Low energy consumption and high efficient. Since the PTO wood pellet mill is powered by the tractor, it can work continuously and use less energy.
4. With a competitive price. Since the PTO wood pellet mill is without power engine, so the price the lower and the farmers can take advantage of their tractors to be used as the power.
5. Can customized according your requirement. We have 8 different models of PTO wood pellet mill in different size and production capacity, we can offer you PTO pellet mill according to your requirement.

Technical Data

Model Power Die Diameter Die Hole Specification Saw Dust Capacity Feed Capacity Packing Size
KL120P 6-10HP 120mm 2.5-10mm 40-60kg/h 60-100kg/h 50*41*76 cm
KL150P 6-12HP 150mm 2.5-10mm 50-90kg/h 90-120kg/h 57*44*76  cm
KL200P 10-18HP 200mm 2.5-10mm 110-140kg/h 200-300kg/h 77*56*102 cm
KL230P 18-28HP 230mm 2.5-10mm 150-190kg/h 300-400kg/h 77*56*102 cm
KL260P 28-45HP 260mm 2.5-10mm 200-280kg/h 400-600kg/h 77*56*105 cm
KL300P 45-55HP 300mm 2.5-10mm 300-360kg/h 600-800kg/h 77*80*106 cm
KL360P 50-60HP 360mm 2.5-10mm 300-380kg/h 700-900kg/h 77*80*106 cm
KL400P 50-70HP 400mm 2.5-10mm 400-550kg/h 900-1100kg/h 77*80*106 cm
Wood Pellet Mill Spare Parts
 1. If there is slowdown in pellet production capacity, please check the gap between rollers and dies as well as roller shell wear.
2. Check the wear pattern of pellet die surface, you may find indications of poor feedstock distribution.
3. Probably the most important factor in die life is the setting and adjusting of the rollers. Usually the gap distance between between die and rollers are within 0.1-0.5mm.
4. Depending on the amount and frequency of your pellet die changes, always try to start new rollers with new flat dies at the same time.
5. When placing a new die or roller, you should remember to polish them in advance. Pellet dies and rollers are cast by heat-treated technology which includes process of drilling, quenching etc, thus leading burrs in the pellet die holes and surface.
6. Before turn off pellet mill, you can mix some some feedstock with oil and add them into pellet machine until the die mould is full of oil. This method can prolong working life of pellets dies and rollers.

 

Raw Materials for Small Wood Pellet Mill
1). Biomass pellets: straw, alfalfa, wood waste, cornstalks, cardboard, grass, leaves, clippings,rice husks, branches, wood shavings, saw dust, etc.
2). Feed Pellets: Animal feed was a product of materials such as alfalfa, grain and oil cake,etc.
3). Moisture content of material: 14%-18%
4). Material size: less than 5mm.

 

Why Choose Our PTO Pellet Mill
Compared with other types of pellet mill, PTO wood pellet mill are more small in volume and light in weight, the machine is movable. PTO driven pellet mill is powered by the tractor and others are powered by engines which makes the machine is more suitable for farm use. Relatively high working efficiency. The PTO driven pellet mill have a relatively high working efficiency than other types of wood pellet mills considering the energy it use.
 

About our company

HangZhou CZPT Machinery Co., Ltd was founded in 1992, which is a high tech enterprise that integrates new product design, development, manufecturing and international trade business.

Main products: flat die pellet mill, vertical ring die pellet mill, wood chipper, hammer mill, pellet cooler and cutting wood machine etc.. Our company always takes the product quality and credibility as the foundation of us present and tomorrow survival and development. We always adhere to the “quality and reputation first” concept.And we have got the ‘quality advanced company” and “quality trustworthy company” and the “honorary company”. we are AAA level enterprise to be named by the national quality, reputation and service department.

Our company is located in HangZhou Bay, near to HangZhou seaport. It’s convient in sea, road, and air transportation, we have very perfect import and export service system in China. At the same tine , we have a widely range of commodity information network, partners all over the world. Believe our sincere cooperation will creat a better tomorrow.

 

Our Services
1. We provide 1 year guarantee.
2. We provide English manual and video for installation & operation.
3. If required, we could send technicians for installation and commissioning, training.
4. We provide feed formula and free spare parts.

 

FAQ
1. How to order?
After you decide to purchase, we will send you proforma invoice with our bank information,
bring this PI to the bank, and ask to make T/T for the payment. For single set, your machine can be ready within 30-45 days after we getting the payment, we will send to the port and deliver to you by sea.
2. Related products?
KL150C,KL200C,KL300C,KL400C
3. How to get to your factory?
Our company is located in Sanlihezi Village, Xihu (West Lake) Dis. Road, HangZhou, ZheJiang province, near HangZhou, if you arrive in HangZhou Liuting Airport, we can drive to HangZhou to pick you up to our factory.
4. How long is your warranty period?
One year
5. How does your factory do quality control?
Our factory has gained CE certificate and ISO certificate. ” Quality is priority” we always pay great attention on quality controling from the begining to the end.

Contact informaion:

Sales Director: Ruby

 

 
Tel: 1526453 0571

 

 
Address: Sanlihezi Village, Xihu (West Lake) Dis. District, Laizh

Type: Flat Die Platen Wheel
Voltage: Not
Automatic Grade: Automatic
Controlling Mode: Tractor
Energy Saving: Energy Saving
Certification: CE, ISO
Customization:
Available

|

Customized Request

Shaft Collar

PTO Shaft Safety Chains

PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
Shaft Collar

Safety chains

<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.

Shield

A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
Shaft Collar

IID shaft guard

The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.

Overrunning clutch

An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.

Direction of rotation

Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
China Good quality Pto Driven Sunflower Shell Biomass Pellet Machine   pto shaft connectorChina Good quality Pto Driven Sunflower Shell Biomass Pellet Machine   pto shaft connector
editor by CX 2023-10-25

QD Bushing

As one of the leading QD bushing manufacturers, suppliers, and exporters of mechanical products, We offer QD bushings and many other products.

Please contact us for details.

Manufacturer supplier exporter of QD bushing.

Recent Posts